|
产品系列 / 类别
|
产品 / 话题
|
类型
|
标题
|
日期
|
| ASCMO | ASCMO | Flyer / Brochure / White Paper | ASCMO Flyer
ETAS ASCMO
Data-based Modeling and Model-based Calibration
ETAS ASCMO is the ideal solution for databased modeling and model-based calibration. It enables users to accurately model, analyze, and optimize the behavior of complex systems with few measurements and advanced algorithms. Both steady-state and transient system behaviors can be captured.
At a Glance
Capture of complex system behavior in both steady-state and … | 2023/06/29 |
| Measurement Probes | CBS10x | Flyer / Brochure / White Paper | CBS10x 宣传册
CBS10x - Smart Lambda Sensor Cable
At a Glance
Bosch LSU 4.9 wideband lambda sensors are very easy to integrate into open-loop and closed-loop control systems
The sensor can be directly connected to the cable’s original Bosch connector
Choose between measurements of oxygen content, λ-value, or the lambda sensor’s pump current
Proportional current or voltage output
… | 2023/06/28 |
| ES400 | ES410, ES411, ES420, ES430 / ES432, ES441 | Flyer / Brochure / White Paper | ES400 系列产品介绍
ES400 系列产品介绍
ES400 … | 2023/06/28 |
| ES400 | ES415 | Flyer / Brochure / White Paper | ES415 – High Definition A/D Module with Sensor Supply Flyer
ES415 – High Definition A/D Module with Sensor Supply
The ES415 measurement module includes an analog-digital converter for high definition measurements on analog signals.
4 electrically isolated measurement channels with adjustable and short circuit proof sensor supply are available for measurement. Data can be sampled at up to 100 kHz on each measurement channel.
At a Glance
| 2023/06/28 |
| ES500 | ES523 | Flyer / Brochure / White Paper | ES523 宣传册
ES523 – CAN FD Interface Module
The ES523 CAN FD Interface Module is designed to calibrate ECUs and capture measurement data from ECUs and their environment.
It provides four CAN and three Ethernet connections and supports the new high-performance CAN FD (CAN with flexible data rate) protocol on all CAN channels.
At a glance
Four electrically isolated CAN channels with … | 2023/06/28 |
| ES500 | ES582 | Flyer / Brochure / White Paper | ES582 Flyer
ES582 – USB CAN FD Bus Interface
The ES582.1 module is a dual-channel, compact and cost effective CAN FD interface. The module is a solution with flexible data rate support for connecting the PC or notebook to vehicle CAN (Controller Area Network) busses or the CAN port of individual electronic control units (ECU) on the vehicle.
At a Glance
Compact and cost-effective dual channel CAN … | 2023/06/28 |
| ES500 | ES592, ES593, ES595 | Flyer / Brochure / White Paper | ES59x – ECU and Bus Interface Modules
ES59x – ECU和总线接口模块
功能一览
带以太网/XETK、ETK、Flexray、CAN和LIN接口的紧凑型硬件模块，适合在车内使用
ECU标定、诊断和刷新程序
总线监控和记录
收集时间同步数据
与INCA无缝集成
… | 2023/06/28 |
| ES600 | ES600 | Flyer / Brochure / White Paper | ES600.2 宣传册
ES600.2 Network module
The ES600.2 Network Module is the heart of the modular, Ethernet-based ETAS measurement, calibration, diagnostics, and prototyping system.
At a glance:
Data transfer between the host application on the desktop / laptop PC or ES910 Prototyping and Interface Module, and multiple measurement, Interface or prototyping modules, or XETK ECU interfaces via … | 2023/06/28 |
| ES600 | ES620 | Flyer / Brochure / White Paper | ES620 产品介绍
ES620 - 紧凑型设备组的恒温模块
功能一览：
16 个用于温度传感器的电隔离的测量通道
测量通道与供电电压电隔离
每个通道的采样率均可调节，范围在 10 samples/s 到 0.1 samples/s
用于过滤信号的参数化软件过滤器
21比特的高测量精度
测量温度范围在 -210 °C 到 1372 °C (-346 … | 2023/06/28 |
| ES600 | ES63x | Flyer / Brochure / White Paper | ES63x – Lambda模块
ES63x – Lambda模块
功能概览
高精度Lambda仪(单双通道版本)
支持Bosch的包括LSU … | 2023/06/28 |
| ES600 | ES650 | Flyer / Brochure / White Paper | ES650 产品介绍
ES650 – 紧凑型设备组的恒温模/数模块
功能一览：
16 个模拟电压的电隔离的测量通道
测量通道与供电电压电隔离
每个通道的采样率均可调节
用于过滤信号的参数化软件滤波器
16 比特 (模/数) 或 21 比特 (恒温) 的高测量精度
两个可用选择的电压范围，从±10 V 到 ±60 V … | 2023/06/28 |
