Size and Weight |
|
Dimensions (HxWxD) | 51.5 x 40 x 142 mm / 2.0 x 1.6 x 5.6 in |
37.5 x 40 x 129 mm / 1.5 x 1.6 x 5.1 in (tapered rear) | |
Weight | 350 g / 0.77 lb |
Environment |
|
Temperature range | -40 °C to +120 °C (-40 °F to +248 °F) (operation) |
-40 °C to +125 °C (-40 °F to +257 °F) (storage) | |
Protection class | IP67 (with cables connected) |
Altitude | Up to 5,000 m / 16,400 ft |
Tested for | Mechanical shock, vibration, fall, temperature shock, temperature alteration, storage in humidity, salt fog attack, impact from flying rocks, according to DIN EN 60068 res. ISO 16750 |
Power supply |
|
Operating voltage | 5 V to 50 V DC (-40 °C to +85 °C / -40 °F to +185 °F), |
6 V to 50 V DC (+85 °C to +120 °C / +185 °C to +248 °F) | |
Reverse voltage protection; Load dump protection | Via Cables CBEP410 / 415 / 420 / 430 / 450 |
Power consumption (at 12 V) | 1.8 W typ. (operation), < 25 mW (stand-by) |
Host interface |
|
Ethernet connection and protocol | 100 Base-T, Full-Duplex required, XCP-on-UDP/IP |
IP address | Dynamic via INCA or configuration tool (default 192.168.40.44) |
Inputs |
|
Channels | 4, each with separate sensor supply |
Input voltage range | ±50 V |
Switching thresholds | Hysteresis, active and inactive level individually configurable |
Switching threshold resolution | 0.1 V |
Glitch filter | De-bouncing, configurable by software |
Min. pulse width / max. signal frequency | 120 ns / 4 MHz (theoret. value at 50 % duty cycle) |
Time resolution | 20 ns |
Counter size | 32 bit |
Functionality | Counter, frequency, duty cycle, active time, inactive time, period time, state |
Combination of two channels facilitate evaluation of complex signals | |
Electrical isolation of inputs | Channel to channel and channel to supply |
Input impedance | > 2 MΩ / < 250 pF |
Over voltage protection | ±100 V continuous |
Sampling rate | 0.5 Samples/s to 10 kSamples/s |
Sensor supply output |
|
Output voltage | +5 V to +15 V DC or Off, individually adjustable per channel, common ground with power supply, resolution < 1 mV |
Output current | ≤30 mA, overcurrent protected (200 mA) |
Accuracy |
|
Ripple of sensor supply output volt-age (measurement limited to 80 MHz) | < 20 mV peak to peak |
Accuracy of sensor supply output voltage without load | ±10 mV over the whole output voltage range |
Support by ETAS Software |
|
Supported by INCA V5.4.1 and up via add-on (part of ES441 delivery), INTECRIO V3.x, ES400 configuration and integration tool for XCP applications. |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.