Size and Weight |
|
| Dimensions (HxWxD) | 72 x 128 x 160 mm / 2.8 x 5 x 6.3 in |
| Weight | 1085 g / 2.39 lbs |
Environment |
|
| Temperature range | -40 °C to +70 °C / -40 °F to +158 °F (operation) |
| -40 °C to +85 °C / -40 °F to +185 °F (storage) | |
Power supply |
|
| Operating voltage (reverse voltage protection) | 6 V to 32 V DC, reverse-voltage protected up to 40 V, protected against load dump |
Current consumption |
|
| Continuous operation | 270 mA at 12 V |
| Stand-by | 5 mA at 12 V |
Host interface |
|
| Ethernet connection | 10 Base-T |
| Protocol | TCP/IP |
| IP address | Dynamically via INCA |
Inputs |
|
| Number of channels | 8 |
| Resolution | 21 bit, corresponding to 0.01 °C |
| Acquisition rate | 0.1 Samples/s to 10 Samples/s, configurable per module |
| Measuring range depending on thermocouple type | B +250 °C to +1820 °C / +482 °F to +3308 °F |
| E -200 °C to +1000 °C / -328 °F to +1832 °F | |
| J -210 °C to +1200 °C / -346 °F to +2192 °F | |
| K -200 °C to +1372 °C / -392 °F to +2502 °F | |
| N -200 °C to +1300 °C / -392 °F to +2372 °F | |
| R -50 °C to +1768 °C / -58 °F to +3214 °F | |
| S -50 °C to +1768 °C / -58 °F to +3214 °F | |
| T -200 °C to +400 °C / -392 °F to +752 °F | |
| Limit frequency | 10 Hz |
| Input impedance | >10 MΩ II 1 nF |
| Maximum inaccuracy ΔTg depending on thermocouple type | B 0.050 % + 5.0 K |
| E 0.050 % + 0.2 K | |
| J 0.030 % + 0.2 K | |
| K 0.025 % + 0.25 K | |
| N 0.035 % + 0.38 K | |
| R 0.050 % + 2.0 K | |
| S 0.050 % + 2.0 K | |
| T 0.050 % + 0.3 K | |
| Maximum temperature drift ΔTd depending on thermocouple type | B ±0.1 K/K |
| E ±0.004 K/K | |
| J ±0.004 K/K | |
| K ±0.005 K/K | |
| N ±0.008 K/K | |
| R ±0.04 K/K | |
| S ±0.04 K/K | |
| T ±0.005 K/K | |
| Maximum inaccuracy ΔTi depending on the internal resistance of the respective thermocouple at internal resistances > 50 Ω | B ±0.08 K/Ω |
| E ±0.03 K/Ω | |
| J ±0.003 K/Ω | |
| K ±0.004 K/Ω | |
| N ±0.006 K/Ω | |
| R ±0.03 K/Ω | |
| S ±0.03 K/Ω | |
| T ±0.004 K/Ω | |
| Maximum inaccuracy of cold junction compensation ΔTcjc | ±1 K |
| Maximum temperature drift of cold junction compensation ΔTd | ±0.008 K/K |
| Maximum allowed input voltage | 32 V |
Inputs general |
|
| Electrical isolation of inputs | ±100 V channel to channel, channel to supply voltage |
A/D inputs |
|
| Number of channels | 8 |
| Resolution | 16 bit, higher at slower sampling rates |
| Acquisition rate | 0.5 Samples/s to 2 kSamples/s, configurable per module |
| Input voltage ranges | ±10 V, ±60 V |
| Input filter | Low-pass of 4th order, limit frequency 1 kHz, max. overshooting 3 % |
| Input impedance | >15 MΩ II 1 nF (±10 V); 2 MΩ II 1 nF (±60 V) |
| Measurement error | 2 mV + (U in x 0.05 %) in the ±10 V measuring range |
| 12 mV + (U in x 0.05 %) in the ±60 V measuring range | |
| Temperature drift | 10 ppm/°C, relative to input voltage |
Support by ETAS Software |
|
| INCA | |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.