Size and Weight |
|
| Dimensions (HxWxD) | 51 x 40 x 139 mm / 2.0 x 1.6 x 5.5 in |
| 37 x 40 x 124 mm / 1.5 x 1.6 x 4.9 in (tapered rear) | |
| Weight | 350 g / 0.77 lb |
Environment |
|
| Temperature range | -40 °C to +120 °C (-40 °F to +248 °F) (operation) |
| -40 °C to +125 °C (-40 °F to +257 °F) (storage) | |
| Protection class | IP67 (with cables connected) |
| Altitude | Up to 5,000 m / 16,400 ft |
| Tested for | Mechanical shock, vibration, fall, temperature shock, temperature alteration, storage in humidity, salt fog attack, impact from flying rocks, according to DIN EN 60068 res. ISO 16750 |
Power Supply (module) |
|
| Operating voltage | 5 V to 50 V DC (-40 °C to +85 °C / -40 °F to +185 °F), |
| 6 V to 50 V DC (+85 °C to +120 °C / +185 °F to +248 °F) | |
| Reverse voltage protection; Load dump protection | Via Cables CBEP410 / 415 / 425 / 430 / 450 |
| Power consumption (at 12 V) | 2.0 W typ. (operation), < 200 mW (stand-by) |
Power Supply (sensor heater) |
|
| Reverse voltage protection; Load dump protection | Via Lambda Sensor Cables |
| Operating voltage | 9 V to 16 V |
| Maximum voltage | 28 V |
Host interface |
|
| Ethernet connection | 100 Base-T |
| Protocol | XCP-on-UDP/IP |
| IP address | Dynamic via INCA or ES400 configuration and integration tool (default 192.168.40.44) |
| Measurement signal types (signals can be provided concurrently to host system for each input channel) | Lambda, 1/ Lambda, A/F, F/A, O2 , or Ip; software configurable |
Sensor connection |
|
| Channels | 1 |
| Supported sensor types | BOSCH LSU4.9 (ES430/ES432) or LSU ADV-G (ES432) |
| Sensor detection via sensor | LSU ADV-G with trapezoid plug, code A7 |
| Sensor detection via splitter cable | LSU 4.9 with RB150 plug, code 1 or code A |
| Sampling rate | 0.5 Samples/s to 2 kSamples/s, Ri is measured with 2 Samples/s |
| Heater control | Included; configurable to keep sensor in operation also in module stand-by mode |
| Measurement range | λ: 0.6 to 16 |
| 1/λ: 1.67 to 0.0625 | |
| A/F: 8.5 to 200 | |
| F/A: 0.118 to 0.005 | |
| O2: 0 % to 25 % | |
| Ip: -2.5 mA to 5 mA | |
| Ri: 0 Ω to 1950 Ω | |
Analog output |
|
| Channels | 1, electrically isolated to any supply |
| Range | 0 to 10 V |
| Signal types | λ, 1/λ, A/F, F/A, O2 , or Ip, configurable via software |
| Output impedance | Virtually 0 Ω, short-circuit proof and protected against external voltage of up to 28 V |
Support by ETAS Software |
|
| Supported by INCA V5.4.1 and up (ES430), by INCA 6.2.1 and up (ES432) via add-on (part of ES430/ES432 delivery), INTECRIO V3.x, ES400 configuration and integration tool for XCP applications | |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.