Block diagram ES582
Size and Weight |
|
| Dimensions (HxWxD) | 24 mm x 48 mm x 86.7 mm / 0.94 in x 1.89 in x 3.40 in (housing) |
| Dimension with the Integrated Cable | 24 mm x 48 mm x 1586.7 mm / 0.94 in x 1.89 in x 624.68 in |
| Weight | 0.15Kg / 0.33 lb (with cable) |
Environment |
|
| Temperature range | -40 °C to +70 °C / -40 °F to +158 °F (operation) |
| -40 °C to +85 °C / -40 °F to +185 °F (transport and storage) | |
| Relative humidity | 95% Max |
| Ingress protection | IP52 |
Power supply |
|
| Current consumption | Power provided by USB port of the host PC or notebook |
| Operating Voltage Range | 4.75 V – 5.25 V DC (Supply via USB port) |
| Operating Current Range | 0.35 A (Max) at 5 V DC |
CAN FD / CAN interfaces |
|
| Number of channels | 2 |
| CAN/CAN FD | CAN FD SIC : 5Mbit/ sec (higher number of nodes and sub-topology), 8Mbit/ sec (point to point connection), 64 Bytes (Payload) |
| Protocols | CCP (not for CAN FD), XCP, KWP-on-CAN (ISO 14230/ISO 15765), UDS (ISO 14229/ISO 15765), CAN Monitoring, OBD-on-CAN (ISO 15765-4) |
| CAN-Transceiver (Physical Layer) | TJA1044G |
| Maximum baud rate for CAN | 1 Mbit/s |
| Maximum baud rate for CANFD | 5 Mbit/s (Higher boud rates are possible at optimal environment and topology conditions) |
| Electrical isolation | Interface is electrically isolated |
Acquisition of synchronous data |
|
| INCA synchronizes ECU data from the ES582 module with signals from measurement modules (e.g., from ES4xx or ES6xx modules) and ECUs with ETK or XETKs interface | |
PC interface |
|
| USB | USB 2.0, High Speed |
Host system requirements |
|
| Operating system | Windows® 7, 8, 10, 11 |
Status display |
|
| LEDs | Operating state, interfaces |
Software support |
|
| Firmware Update | Support onwards HSP V14.1.0 |
| INCA | Supported starts from INCA V7.2.3 for 5 MBaud and 7.5.0 for 8MBaud |
Delivery content |
|
| CAN Bus Interface USB Module, CAN-Y-cable, driver installation CD and user manual | |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.