Size and Weight |
|
| Dimensions (HxWxD) | 20 x 40 x 100 mm / 0.8 x 1.6 x 4 in (housing) |
| Weight | 120 g / 0.26 lb |
Environment |
|
| Temperature range | -40 °C to +70 °C / -40 °F to +158 °F (operation) |
| -40 °C to +85 °C / -40 °F to +185 °F (transport and storage) | |
| Relative humidity range | 15 % to 95 %, non-condensing |
Power supply |
|
| Current consumption | typ. 250 mA (at 4,71 V) |
| Power provided by USB port of the host PC or laptop | |
FlexRay interface |
|
| FlexRay ports | One FlexRay node with channels A+B, DSUB 9 connector |
| FlexRay version | FlexRay V2.1 rev. B |
| Protocols | XCP-on-FLX[1], FLX-Monitoring[1] |
| FlexRay transceiver | 2 Flexray-Transceiver TJA1081 |
| Microcontroller | NXP LPC1850 ARM Cortex M3 Microcontroller |
| Max. baud rate | 10 Mbit/s |
| Electrical isolation | Interface is magnetically decoupled |
PC interface |
|
| USB | 480 Mbit/s USB 2.0 |
| Integrated USB cable | 1.5 m / 5 ft |
Host system requirements |
|
| Operating system | Windows®8.x, Windows®10 |
Support by ETAS Software |
|
| INCA V7.1.4 and higher, INCA-FLEXRAY add-on is required | |
Notes |
|
| [1] | Supported by INCA |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.