Size and Weight |
||
| Dimensions (HxWxD) | 45 mm x 127 mm x 160 mm / 1.75 in x 5.0 in x 6.3 in (housing) | |
| Weight | 0.8 Kg / 1.8 lbs | |
Environment |
||
| Temperature range | -40 °C to +70 °C / -40 °F to +158 °F (operation) | |
| -40 °C to +85 °C / -40 °F to +185 °F (storage) | ||
| Relative humidity | 0% to 85 % (Operations) , non-condensing | |
| 0% to 95 % (Storage) | ||
| Tested for | Mechanical shock, vibration, fall, temperature shock, temperature alteration, according to EN 60068 and ISO 16750 | |
| Ingress protection | IP30 | |
| Operating Current Range | 9 A Max. (module max. 3A; o/p current per ETH 2 A max.) | |
Power supply |
||
| Operating voltage | 7 V to 29 V DC | |
| Power consumption (at 14.4 V) | 500 mA at 14.4 V (typical, operation) | |
| 20 mA at 14.4 V (typical, stand-by) | ||
| Power management (wake-up / stand-by) | Power-on/off when Ethernet traffic starts/stops (PC or upstream module on/off) | |
| Protection | Reverse voltage protection, load dump protection | |
Ethernet interfaces |
||
| Connection and protocols | 1 x 10 / 100 BASE-T (Upstream) | |
| Time synchronization | Time resolution: 1 μs | |
| Power supply of connected devices | ES4xx and ES6xx measurement modules, XETKs | |
ECU and bus interfaces |
||
| Universal ECU interface for demanding measurement applications | ||
| LIN | 2 channels, LIN V2.2A | |
| Low Speed CAN : | CAN Transceiver: TJA1054A | |
| Speed: Max. 125 kBaud | ||
| LIN Transceiver: MCZ33661EF | ||
| Specification: LIN V2.1 | ||
| CAN | 2 channels, optionally High Speed (up to 1 MBaud) or Low Speed | |
| High Speed CAN : | CAN Transceiver: TJA1040 | |
| Operating Mode | Basic, Compatibility, Advanced | |
| Protocol Transfer | Single Mode supports speed of 8Mbit/s Block Mode supports either 8Mbit/s or 100 Mbit/s | |
Status display |
||
| LEDs | Operation, interfaces, synchronization | |
Compatible hardware |
||
| PC / ETAS Upstream Module | Desktop or Laptop PC with Ethernet port, ES592, ES593-D, ES595, and ES600 Network and Interface Modules | |
| ETAS Downstream Module | ES592, ES593-D, ES595, ES600 Network and Interface Modules, ES4xx and ES6xx Measurement Modules, ES910 Prototyping and Interface Module, XETK | |
Support by ETAS software |
||
| INCA | INCA V6.2.1 and up INCA-LIN V6.2.3 and up |
|
Host interface |
||
| Fast Ethernet | 2 x 10 / 100BASE-T Ethernet (Downstream), ETH1, ETH2 supports ETAS device synchronization mechanism | |
| Host PC | Supports 100Mbit/s, full duplex RJ45 connection with 32-bit data bus | |
| Protocol | TCP/IP, Ethernet Switching (Layer 2), IEEE802.3 | |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.