Size and weight |
|
| Dimensions (HxWxD) | 63 mm x 215 mm x 241 mm |
| Weight | 3.7 kg |
Environment |
|
| Temperature range | -40 °C to +70 °C (operation) |
| -40 °C to +85 °C (storage) | |
| Robustness | Mechanical shock, vibration, drop, temperature shock, temperature change |
| Protection class | IP40 |
| Operating altitude | Max. 5,000 m above sea level |
Power supply |
|
| Operating voltage | 6 V to 32 V DC |
| Power consumption, continuous operation | < 5 A at 12 V, max. 10 A |
| Power consumption, standby | < 10 mA at 12 V, max. 20 mA (low-power standby) |
| Energy management (wake-up/standby) | Wake-up/standby control via bus and I/O interfaces, on/off pushbutton switch |
| Protection | Reverse polarity protection, overload protection |
Interfaces |
|
| Host: 1 x Gigabit Ethernet | 100/1000 Base-T |
| Devices: 1 x Gigabit Ethernet | 100/1000 Base-T |
| Power supply | 0.5 A for connected interface modules |
| Expansion options | 2 x USB 3.0 type A and 2 x USB 2.0 type A for future applications |
| I/O interface | 25-pin micro DSUB (remote power, remote status LEDs, 4 x TTL input, 4 x TTL output, KL15 input) |
| Through ES89x module | 2 FETK, 1 XETK, 5 CAN/CAN FD, 1 FlexRay, 1 LIN |
| Through ES88x | 3 BR-XETK, 1 XETK, 5 CAN/CAN FD |
Controls |
|
| Status LEDs | Displaying of operational state, fault state, temperature status, synchronization, RP system status, LED (can be assigned by the user) |
| Pushbutton switch 1 | Wake up and switch off the device |
| Pushbutton switch 2 | Can be assigned by the user |
Central processing unit |
|
| Processor | Intel Core i5-5350U, dual core |
| Main memory | 4 GB RAM |
| Operating system | QNX 6.6 |
| Internal storage | 128 GB solid state drive (SSD) (operating system, application and user data) |
Bypass readiness |
|
| In operation | Immediate |
| In standby | Approx. 15 seconds after switching on |
Compatible products |
|
| Host interface | Desktop/laptop PC with Ethernet port |
| Hardware | ES891, ES892, ES882, ES886 (ECU and bus interface modules) ES801 (base module for power supply) ES600.2 (Ethernet switch for measurement modules) |
| Software | INCA-EIP (experiment environment), INTECRIO (integration and configuration), ASCET and MATLAB®/Simulink® (model-based development tools) |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.