Size and Weight |
|
| Dimensions (HxWxD) | 20 x 35 x 83 mm / 0.79 x 1.38 x 3.27 in |
| Weight | 50 g / 0.11 lb |
Environment |
|
| Temperature range | -40 °C to +50 °C / -40 °F to +122 °F (operation) |
| -40 °C to +85 °C / -40 °F to +185 °F (storage) | |
Power supply |
|
| Input voltage | 3.3 V / 5 V |
| Power consumption | 1.2 W (typically) / 1.8 W (max.) |
| Stand-by current | < 1.2 mA |
FlexRay bus interface |
|
| FlexRay controller | 1 node with 2 channels |
| BOSCH E-Ray IP-Module FPGA based | |
| Conformance with FlexRay protocol specification V2.1 | |
| Sending and/or receiving of up to 128 frames during a communication cycle | |
| Support for payloads up to 254 bytes | |
| Hardware filtering for slot counter, cycle counter and channel | |
| Hardware supported redundancy handling over both channels | |
| Network management supported | |
| Physical layer | Philips TJA1080 transceiver (on both channels) |
| Electric isolation | Both channels are electrically isolated from each other and from other circuitry |
| Wake-up | Wake-up and sleep functionality |
Comfort features |
|
| LEDs | For quick status check on FlexRay bus |
| Conformance to FlexRay specification V2.1 | ISO 9646 |
Support by ETAS Software |
|
| INTECRIO V3.1.1, INCA V7.0.0 with HSP V8.0.0 and higher, ASCET-RP V6.2.1 with HSP V8.1.0 and higher | |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.