ES900 – Prototyping and Interface Modules

Prototyping and interface modules of the ES900 product family are suitable for applications in rough environments in the vehicle and for test bench applications. The heart of the basis module ES910 is a NXP PowerQUICCTM III MPC8548 processor.

ES910 – Prototyping and Interface Module

The modules provide ETK, XETK, CAN, CAN-FD, LIN, and FlexRay interfaces for ECU and vehicle bus access in a compact unit. The ES930 Multi-I/O Module enables access to sensors and actuators by several different inputs and output capabilities. For decentralized ambient measurement data acquisition, both micro measurement modules of the ES400 family and ES63x lambda measurement modules can be connected to the ES910 module. Base module and PC with host application are interconnected via Gbit/s Ethernet interface.

With ES900 modules prototypes of new control and diagnostic functions for vehicle ECUs can be validated under real-life ambient conditions. The control prototypes are configured by INTECRIO and ASCET-RP. INTECRIO integrates functions in the form of generic C code, MATLAB^®/ Simulink^® or ASCET models, or AUTOSAR compliant software modules. For target-close prototyping of new functions the ES910 basic module supports the real-time OS RTA-OSEK and the connection of ECUs by ETK, XETK, or XCP bypass interfaces.

With INCA, ES900 control prototypes can be integrated forcalibration purposes. In addition, ES900 modules can be employed with INCA for the collection of ECU and vehicle bus signals and for ECU calibration. For automation purposes INCA functions can be transferred to the ES910 module, executed in real-time, and integrated with test bench automations via EtherCAT- or iLinkRT^TM-interfaces.

Benefits

Compact prototyping and interface modules for design development and application
PowerQUICCTM III MPC8548 processor for real-time calculations
ETK, XETK, CAN, CAN-FD, LIN, and FlexRay interfaces
Integrated with INCA, INTECRIO and ASCET
Support of ETK, XETK, XCP on Ethernet and XCP on CAN bypass
Connection of ES930 Multi-I/O-Module as well as ES63x and ES400 measurement modules
Supports EtherCAT and iLinkRT^TM test bench automation interfaces

Members of the ES900 Product Family

Product	Characteristics
ES910 – Prototyping and Interface Module	PowerQUICC™ Microprocessor, 1x ETK, 1x XETK, 2x CAN, 2 x LIN, ES400 Interface
ES920 – FlexRay Module	1 FlexRay node (2 channels)
ES921 – CAN Module	2x CAN
ES922 – CAN FD Module	2x CAN-FD
ES930 – Multi-I/O Module	16 input channels, 14 output channels, 6 half-bridges with current measurement

ES9xx – Products

ES910 – Prototyping and Interface Module

The ES910 Prototyping and Interface Module is suitable for applications in rough environments, i.e., in the vehicle or at the test bench. The module provides a variety of interfaces for ECUs, vehicle busses and measuring instruments.

ES920 – FlexRay Module

The ES920 FlexRay Module adds a FlexRay bus interface to the compact ES910 Prototyping and Interface Module. It is plugged into the extension slot of the ES910 module.

ES921 – CAN Module

The ES921 CAN module provides two additional CAN interfaces for the compact ES910 Prototyping and Interface Module. It is plugged into the extension slot of the ES910 module.

ES922 – CAN FD Module

The ES922 CAN FD module provides two additional CAN FD interfaces for the compact ES910 Prototyping and Interface Module.

ES930 – Multi-I/O Module

The ETAS ES930 Multi-I/O Module is a powerful, flexible I/O all-rounder with an excellent price/performance ratio. The compact, rugged, versatile and powerful module offers several digital and analog input and output channels for signal recording and output.