Size and Weight |
|
| Dimensions (HxWxD) | 20 x 35 x 83 mm /0.79 x 1.38 x 3.27 in |
| Weight | 50 g/0.11 lb |
Environment |
|
| Temperature range | -40 °C to +50 °C / -40 °F to +122 °F (operation) |
| -40 °C to +85 °C/-40 °F to +185 °F (storage) | |
Power supply |
|
| Input voltage | 3.3 V /5 V |
| Power consumption | 0.85 W (typically)/1 W (max.) |
| Stand-by current | < 0.7 mA |
CAN bus interface/CAN FD header |
|
| Channels | 2 independent channels |
| CAN FD | Each channel is separately configurable either as High Speed CAN FD or as Low Speed CAN |
| High Speed CAN | TJA1044G transceiver |
| 5 MBd maximum baud rate for CAN FD with a bus length of up to 20 m | |
| 1 MBd maximum baud rate for High Speed CAN with a bus length of up to 20m | |
| Differential internal resistor of 10 kΩ | |
| Low Speed CAN | TJA1055 transceiver |
| 125 kBd maximum baud rate | |
| Internal 2.2 kΩ termination resistors | |
| Electrical isolation | Both channels are electrically isolated from each other and from other circuitry |
| Communication controller | FPGA-based |
| Wake-up | Wake-up and sleep function on High Speed CAN (FD) bus |
Comfort features |
|
| LEDs | For quick status checks on the CAN bus |
Support by ETAS Software |
|
| MCD applications | INCA V7.2.6, HSP V11.6.0, and higher |
| MCE applications | INCA V7.2.7 and higher |
| Rapid prototyping | INTECRIO V4.6.3 and higher |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.