Technical Data
CPU interface |
|
Bus interface | 2.5 V/ 3.3 V compatible bus interface for non-multiplexed bus |
16 bit data bus | |
Supported processors | Supports MPC5500 family of microcontrollers in packages with an external bus interface |
For a complete list of supported microprocessors, please refer to the product's User's Guide. | |
Configuration | Project-specific configuration for memory configurations stored in EEPROM |
Board |
|
Dimensions (HxWxD) | 8.9 x 94 x 54 mm/ 0.4 x 3.7 x 2.1 in |
Power supply |
|
Input voltage | 4.3 V to 18 V |
Stand-by: min. 4.3 V | |
Input current at 12 V | approx. 70 mA normal operation |
approx. 12 mA stand-by | |
Memory emulation |
|
Emulation memory | Two memory pages with 1 MB (1024 KB) data memory each, maximum access time 25 nsec |
Measured data memory | One memory page with 256 KB of memory, maximum access time 25 nsec |
Flash memory | 1 MB (1024 KB) flash (data) |
Host interface |
|
Serial interface | 100 Mbit/s |
Double-shielded line | |
Electrically isolated | |
Operation temperature |
|
Temperature range | -40 °C to +110 °C / -40 °F to +230 °F |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.
Ordering Information
1 – Interface Connection
2 – ETK Connection (for all 100 Mbit ETKs)
3 – Power Supply Connection
4 – ECU Connection
5 – Ethernet PC Connection
Order Name | Short Name | Order Number |
---|---|---|
ETK-11.0 | ||
ETK11.0 Emulator Probe | ETK11.0 | F‑00K‑102‑632 |
Optional Accessories for ETK-11.0 | ||
1 – Interface Connection (all 100 Mbit ETKs to ES59x, ES690, ES910) | ||
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 3 m | CBM150‑3 | F‑00K‑102‑556 |
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 5 m | CBM150‑5 | F‑00K‑102‑557 |
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 10 m | CBM150‑10 | F‑00K‑102‑553 |
2 – ETK Connection (for all 100 Mbit ETKs) | ||
ETK ECU Adapter Cable, Shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc), 0m6 | KA54 | F‑00K‑001‑302 |
ETK ECU Adapter Cable, Lemo 1B PHG - JST PHR (4fc-5fc), 0m6 | KA55 | F‑00K‑001‑303 |
ETK ECU Adapter Cable, Shield on ECU-Housing, Lemo 1B HMG - JST PHG (4fc-5fc), 0m085 | CBAM200.2‑0m085 | F‑00K‑104‑312 |
ETK ECU Adapter Cable, Shield on ECU-housing, Lemo 1B HMG - JST PHG (4fc-5fc), 0m130 | CBAM200‑0m130 | F‑00K‑104‑852 |
ETK ECU Adapter Cable, pre-assembled into PG9 screwing, shield on ECU- Housing, Lemo 1B PHG - JST PHR (4fc-5fc), 0m50 | CBAM261‑0m5 | F‑00K‑107‑754 |
2&3 – Combined ETK ECU Adapter and Power Supply Cable (all 100 Mbit ETKs) | ||
ETK ECU Adapter and Power Supply Cable, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - open wires (2fc-2c), 0m6 | CBAM210‑0m6 | F‑00K‑104‑873 |
ETK ECU Adapter and Power Supply Cable, Shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - open wires (2fc-2c), 0m60 | CBAM220‑0m6 | F‑00K‑105‑075 |
ETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - JST PAP (2fc-2fc), 0m50 | CBAM260‑0m5 | F‑00K‑107‑753 |
3 – Power Supply Connection | ||
ETK Power Supply Cable with Filter Coil, JST PHR - open wires (2fc-2c), 0m19 | ETV2 | F‑00K‑000‑593 |
ETK Power Supply Cable for External Supply, with Filter Coil, Lemo 0B EGG - open wire (2fc-1c), 0m2 | KA50 | F‑00K‑000‑940 |
External Power Supply Cable for ETKs, Lemo 0B - FGG open wires (2fc-1c), 2 m | K70.1 | F‑00K‑109‑270 |
ETK power supply for 6-36V DC input | ETP1 | F‑00K‑000‑624 |
ETK power supply for 4,3-36V DC input, with galvanic isolation | ETP2 | F‑00K‑104‑010 |
ECU Connection Protection Cap (for CBAM230, CBAM240) | ||
Cap to protect open Lemo 1B sockets against dirt, cost effective | CAP_LEMO_1B_LC | F‑00K‑105‑683 |
5 – Ethernet PC Connection
Further information on the Ethernet PC Connection, can be found in the cable page Ethernet Connection.
Note: This list contains only a selection of available adapters. A comprehensive overview is available in the User Guide of each ETK.