ETK-S22.0 – ECU Interface

Technical Data

CPU interface
Supported processors	Renesas RH850 Family
	For a complete list of supported microprocessors, please refer to the product's User's Guide.
Configuration	Project-specific configuration for memory configurations stored in EEPROM
Board
Dimensions (HxWxD)	approx. 9.8 x 40 x 60 mm/0.386 x 1.575 x 2.362 in
Power supply
Input voltage	5 V to 36 V
	Cranking voltage < 3 sec: 3 V
Input current at 12 V	approx. 100 mA normal operation
	approx. 28 mA stand-by
Memory emulation
Emulation memory	Processor-specific
Measured data memory	Processor-specific
Host interface
Serial interface	100 Mbit/s
	Double-shielded line, max. 30 m/100 ft
	Electrically isolated
Operation temperature
Temperature range	-40 °C to +110 °C / -40 °F to +230 °F

This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.

Ordering Information

1 – Interface Connection
2 – ETK Connection (for all 100 Mbit ETKs)
3 – Power Supply Connection
4 – ECU Connection
5 – Ethernet PC Connection

Order Name	Short Name	Order Number
ETK-S22.0
ETK-S22.0 Emulator Probe for the Renesas RH850 microprocessor family, ECU adaption via 10 SAMTEC 5 pin JST plug, with further adapter	ETK‑S22.0A	F‑00K‑109‑126 F00K109126 F-00K-109-126

Optional Accessories for ETK-S22.0
1 – Interface Connection (all 100 Mbit ETKs to ES59x, ES690, ES910)
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 3 m	CBM150‑3	F‑00K‑102‑556 F00K102556 F-00K-102-556

ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 5 m	CBM150‑5	F‑00K‑102‑557 F00K102557 F-00K-102-557

ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 10 m	CBM150‑10	F‑00K‑102‑553 F00K102553 F-00K-102-553

2 – ETK Connection (for all 100 Mbit ETKs)
ETK ECU Adapter Cable, Shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc), 0m6	KA54	F‑00K‑001‑302 F00K001302 F-00K-001-302

ETK ECU Adapter Cable, Lemo 1B PHG - JST PHR (4fc-5fc), 0m6	KA55	F‑00K‑001‑303 F00K001303 F-00K-001-303

ETK ECU Adapter Cable, Shield on ECU-Housing, Lemo 1B HMG - JST PHG (4fc-5fc), 0m085	CBAM200.2‑0m085	F‑00K‑104‑312 F00K104312 F-00K-104-312

ETK ECU Adapter Cable, Shield on ECU-housing, Lemo 1B HMG - JST PHG (4fc-5fc), 0m130	CBAM200‑0m130	F‑00K‑104‑852 F00K104852 F-00K-104-852

ETK ECU Adapter Cable, pre-assembled into PG9 screwing, shield on ECU- Housing, Lemo 1B PHG - JST PHR (4fc-5fc), 0m50	CBAM261‑0m5	F‑00K‑107‑754 F00K107754 F-00K-107-754

2&3 – Combined ETK ECU Adapter and Power Supply Cable (all 100 Mbit ETKs)
ETK ECU Adapter and Power Supply Cable, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - open wires (2fc-2c), 0m6	CBAM210‑0m6	F‑00K‑104‑873 F00K104873 F-00K-104-873

ETK ECU Adapter and Power Supply Cable, Shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - open wires (2fc-2c), 0m60	CBAM220‑0m6	F‑00K‑105‑075 F00K105075 F-00K-105-075

ETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - JST PAP (2fc-2fc), 0m50	CBAM260‑0m5	F‑00K‑107‑753 F00K107753 F-00K-107-753

3 – Power Supply Connection
ETK Power Supply Cable with Filter Coil, JST PHR - open wires (2fc-2c), 0m19	ETV2	F‑00K‑000‑593 F00K000593 F-00K-000-593

ETK Power Supply Cable for External Supply, with Filter Coil, Lemo 0B EGG - open wire (2fc-1c), 0m2	KA50	F‑00K‑000‑940 F00K000940 F-00K-000-940

External Power Supply Cable for ETKs, Lemo 0B - FGG open wires (2fc-1c), 2 m	K70.1	F‑00K‑109‑270 F00K109270 F-00K-109-270

ETK power supply for 4,3-36V DC input, with galvanic isolation	ETP2	F‑00K‑104‑010 F00K104010 F-00K-104-010
4 – ECU Connection (ETK-S22.0)
ETAL1 ETK ECU Adapter, Erni - SAMTEC (50fc - 10fc), 0m136	ETAL1	F‑00K‑107‑679 F00K107679 F-00K-107-679

ETK Power Supply Cable, JST PAP – open wires (5fc-2c), 0m25	ETV3	F‑00K‑109‑141 F00K109141 F-00K-109-141

Housing
Water-proof case, designed for ETK-S4.x, ETK-S6.x and ETK-S2x	ETKS_C3	F‑00K‑107‑683 F00K107683 F-00K-107-683