Size and Weight |
|
| Dimensions (HxWxD) | 45 mm x 127 mm x 160 mm / 1.75 in x 5.0 in x 6.3 in (housing) |
| Weight | 0,8 kg / 1.8 lbs |
Environment |
|
| Temperature range | -40 °C to +70 °C (-40 °F to +158 °F) (operation) |
| -40 °C to +85 °C (-40 °F to +185 °F) (storage) | |
| Relative humidity | 0% to 85% (Operations), non-condensing |
| 0% to 95% (Storage) | |
| Electrical isolation | All interfaces are electrically isolated |
| Ingress protection | IP30 |
| Operating Current Range | 9 A Max. (module max. 3A; o/p current per ETH 2 A max.) |
Power supply |
|
| Operating voltage | 7 V to 29 V DC |
| Power consumption (at 14,4 V) | 500 mA typical at 14,4 V (typical, operation) |
| 20 mA typical at 14,4 V (typical, stand-by) | |
| Power management (wake-up / stand-by) | Power-on/off when Ethernet traffic starts/stops (PC or upstream module on/off), power-on when data traffic on CAN starts |
| Protection | Reverse voltage protection, load dump protection |
CAN FD / CAN interface |
|
| Number of channels | 4 |
| Mode of operation | CAN FD or CAN operation can be configured for each port individually by software. 2 channels provide wake-up on CAN functionality. |
| Protocols | CCP (not on CAN FD), XCP, KWP-on-CAN (ISO 14230/ISO 15765), UDS (ISO 14229/ISO 15765), CAN Monitoring, OBD-on-CAN (ISO 15765-4) |
| Maximum baud rate on CAN | 1Mbit/ sec (Max Speed), 8 Bytes (Payload) |
| Maximum baud rate on CAN FD | 5Mbit/ sec (higher number of nodes and sub-topology), 8Mbit/ sec (point to point connection), 64 Bytes (Payload) |
| Transceiver (Physical Layer) | TJA1044G, Standard (V2.0a) or Extended Format (V2.0b), ISO High-speed mode, CAN-FD (non-ISO CAN FD V1 and ISO 11898-2:2015 ) |
| Data synchronization | The ETAS hardware synchronization feature enables precise synchronization of all internal, i.e. CAN, and connected signals. This Premium Line hardware feature reduces the deviation between signals down to 1µs, without use of external cables or special set |
Ethernet interface |
|
| Number of channels | 1 upstream channel |
| 3 downstream channels | |
| Connection and protocols | 10/100 Base-T, TCP/IP, Ethernet Switching (Layer 2), IEEE802.3 |
| Time synchronization | Time resolution: 1 µs |
| Power supply of connected downstream devices | ES4xx and ES6xx measurement modules, maximum 2 A per interface independent of the power supply voltage |
Status display |
|
| LEDs | Operation, interfaces, synchronization |
Compatible hardware |
|
| PC / Upstream ETAS Module | Desktop or Laptop-PC with Ethernet port, ES51x, ES592, ES593-D, ES595, and ES600 Network and Interface Modules |
| Downstream ETAS Module | ES520, ES590, ES591, ES592, ES593-D, ES595, and ES600 Network and Interface Modules, ES4xx and ES6xx Measurement Modules, ES910 Prototyping and Interface Module, ES930 Multi I/O Module, XETK |
Software support |
|
| Firmware Update | Support starts from HSP V10.7.0 |
| INCA | Supported starts from INCA V7.1.7 |
| 3rd Party SW support | Easy integration in any application by using the ETAS Bus Interfaces Integration Package (EBI-IP) |
Ce produit a été développé et validé en vue d’applications automobiles. Pour autre domaine d’usage, merci de contacter votre contact chez ETAS.