CPU interface |
|
| Supported processors | ST Microelectronics Stellar SR6 |
| For a complete list of supported microprocessors, please refer to the product's user's guide. | |
| Configuration | Project-specific configuration for memory configurations stored in EEPROM |
Board |
|
| Dimensions (HxWxD) | 8.7 x 38 x 33.5 mm / 0.352 x 1.496 x 1.318 in |
Power supply |
|
| Input voltage | 6.6 V to 36 V |
| Cranking voltage < 3 sec: 3V | |
| Input current at 12 V | Approx. 135 mA normal operation |
| Approx. 40 mA normal stand-by | |
Memory emulation |
|
| Emulation memory | Processor specific |
| Measured data memory | Processor specific |
Host interface |
|
| Serial interface | 100 Mbit/s |
| Double shielded line, max. 30 m/100 ft | |
| Electrically isolated | |
Operation temperature |
|
| Temperature range | -40 °C to +110 °C / -40 °F to +230 °F |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.
Ordering Information
1 – ECU Connection
2 – Automotive Ethernet Connection
3 – Automotive Ethernet Connection
4 – Media Converter (PC Connection)
5 – Media Converter (ES523, ES59x, ES600, ES89x, ES910 Connection)
6 – Ethernet Connection with ES88x
| Order Name | Short Name | Order Number |
|---|---|---|
| BR_XETK-S4 | ||
| BR_XETK-S4.0B ECU interface for the STMicroelectronics STELLAR SR6 microcontroller family (including gap pad) | BR_XETK‑S4.0B | F‑00K‑113‑468 |
 |
||
| Optional Accessories for BR_XETK-S4 | ||
| 1 – ECU Connection | ||
| ETAM2 ETK ECU Adapter, MOLEX - open wires (6fc - 6c), 0m25 | ETAM2 | F‑00K‑109‑306 |
 |
||
| ETAM5 FETK ECU Adapter, MOLEX - MOLEX (6fc - 5fc+1c), 0m136 | ETAM5 | F‑00K‑110‑101 |
 |
||
| ETAM8A BR_XETK-S3/S4 ECU Adapter, FCI - SAMTEC SFM (20c - 10fc), 0m11 | ETAM8A | F‑00K‑110‑754 |
 |
||
| 2 – Automotive Ethernet Connection | ||
| ETABR1 Automotive Ethernet interface cable, MOLEX à open wires (ECU), 0,3m (2fc - 2c) Single wires which need to be twisted while mounting | ETABR1 | F‑00K‑109‑771 |
 |
||
| ETABR2 Automotive Ethernet interface cable, MOLEX à MOLEX (ECU), 0,17m (2fc - 2c) | ETABR2 | F‑00K‑111‑118 |
 |
||
| ETABR3 Automotive Ethernet Interface Cable, MOLEX – open wire (2fc-2c), 0m33 | ETABR3 | F‑00K‑111‑964 |
 |
||
| CBAM290 Automotive Ethernet interface cable, pre-assembled into M10 screwing, shield on ECU-Housing MOLEX à Lemo, 0,60m (2fc - 2c) | CBAM290.1‑0m6 | F‑00K‑111‑117 |
 |
||
| BR_XETK ECU Adapter and Power Supply Cable, pre-assembled into M12 screwing, shield on ECU housing, Lemo 1B PHA - MOLEX (2fc-2fc) / Lemo 1B PHG – open wire (2fc-1c), 0m6 | CBAM295.1‑0m6 | F‑00K‑111‑656 |
 |
||
| BR_XETK ECU Adapter and Power Supply Cable, pre-assembled into M12 screwing, shield on ECU housing, Lemo 1B PHA - MOLEX (2fc-2fc) / Lemo 1B PHG – open wire (2fc-1c), 1m8 | CBAM295.1‑1m8 | F‑00K‑111‑657 |
|
||
| 3 – Automotive Ethernet Connection | ||
| 4 – Media Converter (PC Connection) | ||
| Media Converter Cable, DSUB - RJ45 (9mc-8mc), 1m | CBEB100.1‑1m0 | F‑00K‑110‑094 |
 |
||
| 5 – Media Converter (ES523, ES59x, ES600, ES89x, ES910 Connection) [1] | ||
| ES165.1 Media Converter (1xAE) with Lemo connector | ES165.1 | F‑00K‑112‑184 |
 |
||
| 6 – Ethernet Connection to ES88x | ||
| Automotive Ethernet Splitter Cable 100 Mbit/s, Yamaichi YCP - 4x DSUB (8mc - 4x 9mc), 0m4 | CBEB242.1‑0m4 | F‑00K‑111‑123 |
| Mechanical Accessories | ||
| Gap pad as spare part for BR_XETK-S3/S4 | BR_XETK‑S3_GP | F‑00K‑110‑752 |
 |
||
| Mounting bracket for BR_XETK-S3/S4 | BR_XETK‑S3_MB | F‑00K‑110‑753 |
 |
||
[1] You can find the suitable adapter cable for the Media Converter to your BR_XETK on the ES16x Ordering Information page.
Note: This list contains only a selection of available adapters. A comprehensive overview is available in the User Guide of each ETK.