CPU interface |
|
| Supported processors | Infineon Traveo / Traveo II NXP S32 |
| For a complete list of supported microprocessors, please refer to the product's User's Guide. | |
| Configuration | Project-specific configuration for memory configurations stored in EEPROM |
Board |
|
| Dimensions (HxWxD) | approx. 10.51 x 40 x 60 mm/0.414 x 1.575 x 2.362 in |
Power supply |
|
| Input voltage | 6 V to 36 V |
| Cranking voltage < 3 sec: 3 V | |
| Input current at 12 V | approx. 165 mA normal operation |
| approx. 70 mA stand-by | |
Memory emulation |
|
| Emulation memory | Processor-specific |
| Measured data memory | Processor-specific |
Host interface |
|
| Serial interface | 100 Mbit/s |
| Double-shielded line, max. 30 m/100 ft | |
| Electrically isolated | |
Operation temperature |
|
| Temperature range | -40 °C to +110 °C / -40 °F to +230 °F |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.
Ordering Information
1 – Ethernet PC Connection
2 – Ethernet PC Connection - Adapter Cable
3 – Ethernet Connection - Adapter Cable
4 – Ethernet Connection
5 – XETK Connection
6 – Power Supply Connection
7 – ECU Connection
| Order Name | Short Name | Order Number |
|---|---|---|
| XETK-S16.0 | ||
| XETK-S16.0A ECU interface for ARM based microprocessor families (including gap pad) | XETK‑S16.0A | F‑00K‑112‑258 |
 |
||
| Optional Accessories | ||
| 1 – Ethernet PC Connection | ||
| Ethernet PC Connection Cable 1 Gbit/s, Lemo 1B FGE - RJ45 (10mc-8mc), 3 m | CBE200‑3 | F‑00K‑104‑373 |
 |
||
| Ethernet PC Connection Cable 1 Gbit/s, Lemo 1B FGE - RJ45 (10mc-8mc), 8 m | CBE200‑8 | F‑00K‑104‑374 |
|
||
| 2 – Ethernet PC Connection - Adapter Cable (CBAE200) | ||
| Ethernet Connection Adapter Cable 1 GBit/s, Lemo 1B PHE - RJ45 (10fc- 8mc), 1m2 | CBAE200‑1m2 | F‑00K‑105‑760 |
 |
||
| 3 – Ethernet Connection - Adapter Cable (CBAE330) (ES523, ES59x, ES600.2, ES88x, ES89x) | ||
| Ethernet Connection Adapter Cable 1 GBit/s to 100 MBit/s, Lemo 1B PHE - Lemo 1B FGF (10fc-8mc), 0m5 | CBAE330‑0m5 | F‑00K‑105‑759 |
 |
||
| 4 – Ethernet Connection (ES523, ES59x, ES600.2, ES88x, ES89x, ES910) | ||
| Ethernet Connection Cable 1 GBit/s, Lemo 1B FGE - Lemo 1B FGE (10mc- 10mc), 3 m | CBE230‑3 | F‑00K‑105‑757 |
 |
||
| Ethernet Connection Cable 1 GBit/s, Lemo 1B FGE - Lemo 1B FGE (10mc- 10mc), 8 m | CBE230‑8 | F‑00K‑105‑758 |
|
||
| 5 – XETK Connection | ||
| XETK ECU Adapter Cable, 100 Mbit/s, Shield on ECU-Housing, Lemo 1B HME - JST PHR (10fc-5fc), 0m38 | CBAM230‑0m38 | F‑00K‑105‑791 |
 |
||
| XETK ECU Adapter Cable, 100 MBit/s, Lemo 1B PHE - JST PHR (10fc-5fc), 0m6 | CBAM240‑0m6 | F‑00K‑105‑792 |
 |
||
| XETK ECU Adapter Cable, pre-assembled into PG9 screwing, shield on ECU- Housing, Lemo 1B PHE - JST PHR (10fc-5fc), 0m50 | CBAM271‑0m5 | F‑00K‑107‑867 |
 |
||
| 5&6 – XETK and Power Supply Connection | ||
| XETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHE - JST PHR (10fc-5fc) / Lemo 0B PHG - JST PAP (2fc-2fc), 0m50 | CBAM270‑0m5 | F‑00K‑107‑866 |
 |
||
| XETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHE - JST PHR (10fc-5fc) / Lemo 0B PHG - JST PAP (2fc-2fc), 0m70 | CBAM270‑0m7 | F‑00K‑108‑479 |
|
||
| 6 – Power Supply Connection | ||
| ETK Power Supply Cable for External Supply, with Filter Coil, Lemo 0B EGG - open wire (2fc-1c), 0m2 | KA50 | F‑00K‑000‑940 |
 |
||
| External Power Supply Cable for ETKs, Lemo 0B - FGG open wires (2fc-1c), 2 m | K70.1 | F‑00K‑109‑270 |
 |
||
| 7 – ECU Connection | ||
| ETAM2 ETK ECU Adapter, MOLEX - open wires (6fc - 6c), 0m25 | ETAM2 | F‑00K‑109‑306 |
 |
||
| ETAM5 FETK ECU Adapter, MOLEX - MOLEX (6fc - 5fc+1c), 0m136 | ETAM5 | F‑00K‑110‑101 |
 |
||
| ETAM9 XETK/FETK ECU Adapter, MOLEX - MOLEX (6fc - 5fc), 0m136 | ETAM9 | F‑00K‑111‑043 |
 |
||
| ETAN4A XETK ECU adapter for mounting in external housing, SAMTEC - SAMTEC (40fc - 12fc), 0m136 | ETAN4A | F‑00K‑111‑423 |
| Mechanical Accessories | ||
| Gap Pad for heat dissipation as spare part for the XETK-S22 | XETK‑S22_GP | F‑00K‑111‑041 |
| Housing | ||
| Water-proof case, designed for ETK-S4.x, ETK-S6.x and ETK-S2x | ETKS_C3 | F‑00K‑107‑683 |
 |
||
| ECU Connection Protection Cap (for CBAM230, CBAM240) | ||
| Cap to protect open Lemo 1B sockets against dirt, cost effective | CAP_LEMO_1B_LC | F‑00K‑105‑683 |
 |
||
Note: This list contains only a selection of available adapters. A comprehensive overview is available in the User Guide of each ETK.