CPU interface |
|
| Bus interface | 2.5 V/ 3.3 V (auto-detect) Nexus/JTAG interface |
| 2.5 V/ 3.3 V address/data bus interface for 32 bit multiplexed bus (XETK-V2.0A/C) | |
| Supported processors | NXP* MPC5600 & ST SPC5600 microprocessors on VertiCal Base Board (XETK-V2.0A/C) (* former Freescale) |
| NXP* MPC5600 & ST SPC5600 microprocessors in all packages (XETK-V2.0B) (* former Freescale) | |
| For a complete list of supported microprocessors, please refer to the product's User's Guide. | |
| Configuration | Project-specific configuration for memory configurations stored in EEPROM |
Board |
|
| Dimensions (HxWxD) | Approx. 12 x 60 x 60 mm/ 0.47 x 2.4 x 2.4 in (XETK-V2.0A/C) |
| Approx. 9 x 60 x 60 mm/ 0.35 x 2.4 x 2.4 in ( XETK-V2.0B) | |
Power supply |
|
| Input voltage | 4.3 V to 36 V |
| Stand-by: min. 4.3 V | |
| Input current at 12V | approx. 130 mA normal operation (XETK-V2.0A/C) |
| Approx. 110 mA normal operation (XETK-V2.0B) | |
| approx. 30 mA stand-by (XETK-V2.0A/C) | |
| Approx. 21 mA stand-by (XETK-V2.0B) | |
Memory emulation |
|
| On-board memory | 2 MB Synchronous RAM (XETK-V2.0A) |
| n/a (XETK-V2.0B) | |
| 4 MB Synchronous RAM (XETK-V2.0C) | |
| Emulation memory | ECU-specific, freely configurable within on-board memory (XETK-V2.0A/C) |
| ECU-specific, freely configurable within ECU memory (XETK-V2.0B) | |
| Measured data memory | ECU-specific |
Host interface |
|
| Serial interface | 100 Mbit/s |
| Double-shielded line, 30 m/100 ft max. | |
| Electrically isolated | |
| Debug interface | 50 pin Samtec Nexus/JTAG debugging interface connector (XETK-V2.0A/C) |
| ECU-specific external circuit and connector required (XETK-V2.0B) | |
Operation temperature |
|
| Temperature range | -40 °C to +110 °C / -40 °F to +230 °F |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.
Ordering Information
1 – Ethernet PC Connection
2 – Ethernet PC Connection - Adapter Cable
3 – Ethernet Connection - Adapter Cable
4 – Ethernet Connection
5 – XETK Connection
6 – Power Supply Connection
7 – ECU Connection
| Order Name | Short Name | Order Number |
|---|---|---|
| XETK-V2.0 | ||
| XETK-V2.0 Emulator Probe with 2MByte emulation memory for NXP* MPC5600 & ST SPC5600 microprocessors, ECU adaption via VertiCal Base Board | XETK‑V2.0A | F‑00K‑106‑941 |
 |
||
| XETK-V2.0 Emulator Probe without emulation memory for NXP* MPC5600 & ST SPC5600 microprocessors, ECU adaption via 50 pin Samtec | XETK‑V2.0B | F‑00K‑107‑036 |
|
||
| XETK-V2.0 Emulator Probe with 4MByte emulation memory for NXP* MPC5600 & ST SPC5600 microprocessors, ECU adaption via VertiCal Base Board | XETK‑V2.0C | F‑00K‑109‑733 |
|
||
| Optional Accessories for XETK-V2.0 | ||
| 1 – Ethernet PC Connection | ||
| Ethernet PC Connection Cable 1 Gbit/s, Lemo 1B FGE - RJ45 (10mc-8mc), 3 m | CBE200‑3 | F‑00K‑104‑373 |
 |
||
| Ethernet PC Connection Cable 1 Gbit/s, Lemo 1B FGE - RJ45 (10mc-8mc), 8 m | CBE200‑8 | F‑00K‑104‑374 |
|
||
| 2 – Ethernet PC Connection - Adapter Cable (CBE230-PC) | ||
| Ethernet Connection Adapter Cable 1 GBit/s, Lemo 1B PHE - RJ45 (10fc- 8mc), 1m2 | CBAE200‑1m2 | F‑00K‑105‑760 |
 |
||
| 3 – Ethernet ES600 Connection - Adapter Cable (CBE230-ES600) | ||
| Ethernet Connection Adapter Cable 1 GBit/s to 100 MBit/s, Lemo 1B PHE - Lemo 1B FGF (10fc-8mc), 0m5 | CBAE330‑0m5 | F‑00K‑105‑759 |
 |
||
| 4 – Ethernet ES910 / ES592 / ES595 Connection | ||
| Ethernet Connection Cable 1 GBit/s, Lemo 1B FGE - Lemo 1B FGE (10mc- 10mc), 3 m | CBE230‑3 | F‑00K‑105‑757 |
 |
||
| Ethernet Connection Cable 1 GBit/s, Lemo 1B FGE - Lemo 1B FGE (10mc- 10mc), 8 m | CBE230‑8 | F‑00K‑105‑758 |
|
||
| 5 – XETK Connection | ||
| XETK ECU Adapter Cable, 100 Mbit/s, Shield on ECU-Housing, Lemo 1B HME - JST PHR (10fc-5fc), 0m38 | CBAM230‑0m38 | F‑00K‑105‑791 |
 |
||
| XETK ECU Adapter Cable, 100 MBit/s, Lemo 1B PHE - JST PHR (10fc-5fc), 0m6 | CBAM240‑0m6 | F‑00K‑105‑792 |
 |
||
| XETK ECU Adapter Cable, pre-assembled into PG9 screwing, shield on ECU- Housing, Lemo 1B PHE - JST PHR (10fc-5fc), 0m50 | CBAM271‑0m5 | F‑00K‑107‑867 |
 |
||
| 5&6 – XETK and Power Supply Connection | ||
| XETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHE - JST PHR (10fc-5fc) / Lemo 0B PHG - JST PAP (2fc-2fc), 0m50 | CBAM270‑0m5 | F‑00K‑107‑866 |
 |
||
| XETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHE - JST PHR (10fc-5fc) / Lemo 0B PHG - JST PAP (2fc-2fc), 0m70 | CBAM270‑0m7 | F‑00K‑108‑479 |
|
||
| 6 – Power Supply Connection | ||
| ETK Power Supply Cable, JST PHR - open wires (2fc-2c), 0m19 | ETV | Y‑261‑A24‑446 |
 |
||
| ETK Power Supply Cable for External Supply, with Filter Coil, Lemo 0B EGG - open wire (2fc-1c), 0m2 | KA50 | F‑00K‑000‑940 |
 |
||
| External Power Supply Cable for ETKs, Lemo 0B - FGG open wires (2fc-1c), 2 m | K70.1 | F‑00K‑109‑270 |
 |
||
| 7 – ECU Connection (XETK-V2.0B) | ||
| ETAH1 XETK ECU Adapter, Samtec - Mictor (50mc - 38mc), 0m21 | ETAH1 | F‑00K‑105‑252 |
| ECU Connection Protection Cap (for CBAM230, CBAM240) | ||
| Cap to protect open Lemo 1B sockets against dirt, cost effective | CAP_LEMO_1B_LC | F‑00K‑105‑683 |
 |
||
* former Freescale
Note: This list contains only a selection of available adapters. A comprehensive overview is available in the User Guide of each ETK.